Aesthefill Etrebelle Mennus Plla Filler 200mg/Vial Olidia 365mg Power Fill 1000mg Poly-L -Lactic Acid Pdlla Filler for Stimulates Collagen Regeneration Fill Fac

• Application: Cosmetic Surgery Center
• Shelf Life: 2years
• Function: Remove Wrinkle,Skin Tightening
• Treatment Cycle: Single Treatment Can Be Performed Again After 3 Mo
• Injection Needle: 21g-25g Cannula
• Ingredient: PLA 170mg + Ha 30mg
• Model NO.: Aesthefill
• Feature: Anti-Aging, Anti-Wrinkle
• Transport Package: Carton with Foam
• Specification: 200mg/Vial
• Trademark: Aesthefill Dermalax Etrebella Hyafilia Neurami
• Origin: Korea
• Production Capacity: 1000000 Boxes/Year

Product Description

Product Description

Aesthefill (PDLLA, poly-D, L-lactic acid)is a facial treatment that provides deep tissue regeneration to reduce the signs of facial aging.
Aesthefill is made of PDLLA(poly-D, L-lactic acid), which is a biocompatible and biodegradable substance, approved by the US FDA and also used in lifting thread materials. It naturally stimulates skin cells to produce their own collagen.
AestheFill is based on polylactic acid, which has been successfully used in medicine for over 20 years, and is a completely self-absorbing material that is used to make surgical sutures. After examining the natural properties of the polymer, scientists determined its chemical and physical stability, the lack of protein components that have become a common cause of allergic reactions.
The preparation uses spherical particles of polylactic acid, called thermoplastic and biodegradable polylactide, which is obtained from corn or potato starch by polymerization. Structurally, polylactic acid is a ball, which in turn contains L-lactic and D-lactic acid with the same chemical and physical parameters.
Gel biodegradation occurs independently: as a result of hydrolysis, polylactide gradually breaks down into lactic acid and glycogen, and then is naturally excreted from the body.
As soon as the product enters the skin, it begins to actively fill the voids that arise as a result of skin aging and the loss of its own structural proteins. At the target site, polylactide molecules start the immediate process of tissue renewal and collagen formation, thanks to which the volume is fully replenished and even deep wrinkles are smoothed out. This is due to the special properties of AestheFill molecules, which, thanks to their porous structure, ensure the most effective collagenogenesis. Fibroblasts (skin cells) begin to work both outside and inside the microspheres.
In addition, polylactic acid actively stimulates the production of hyaluronic acid by mature skin cells. The uniqueness of the filler lies in the fact that after the breakdown and complete removal of its main active substance from the body (this process lasts on average from 3 to 4 months), the place where the gel is placed is not left with a void, but with new collagen and elastin. Therefore, the effect will last a long time - until the breakdown of own collagen and elastin begins under the influence of age factors. At this point, the procedure can be repeated.
In the AestheFill hydrogel, polylactide has a porous structure with finely dispersed particles of the same size, which ensures that the gel is evenly distributed under the skin. Many balls appear to "roll on the floor" and fill all voids without needing to be corrected.
When is AestheFill recommended?
Among the main indications for the use of AestheFill hydrogel are:

• lipodystrophy of the face, neck, décolleté and hands, which leads to loss of volume, sagging and sagging skin, loss of elasticity and density;
• depressive areas on the face - sunken cheeks, temples, the presence of a nasolacrimal groove;
• deep wrinkles and folds (in the corners of the eyes, around the mouth, nasolabial and pre-maxillary furrows);
• atrophic and postoperative scars;
• violation of the shapes and contours of the face (asymmetry, loss of volume).

The product is injected directly into the sites of the largest lesions or over the entire face if the skin looks flabby, dehydrated and atonic. The treatment ends with a light massage that evenly fills the inner layers of the dermis with the gel.

Detailed Photos

 

1

2

3

Olidia plla filler with CE
It is a durable and safe collagen stimulator.
Olidia® is an injectable dermal filler based on poly L-lactic acid with CE. This filler has been developed to fill in the lost volume on the face by stimulating collagenesis. The main ingredient of Olidia® is PLLA. PLLA has been used around the world for over 20 years in medical devices, e.g. for dissolving sutures. As Olidia® is made of synthetic materials, there is no need for allergy testing before the procedure.
What is PLLA?
It is poly-L-lactic acid (PLLA) is a biocompatible and biodegradable polymer. PLLA particles stimulate fibroblasts to produce collagen, while the newly formed collagen creates volume. After administration, PLLA is absorbed and degraded, thereby eventually undergoing respiration as Co2.
PLLA is the most durable dermal filler of all currently FDA approved biodegradable products. In 80% of respondents, it lasted for about 24 months.
Olidia plla filler with CE
It is a durable and safe collagen stimulator.
Olidia® is an injectable dermal filler based on poly L-lactic acid with CE. This filler has been developed to fill in the lost volume on the face by stimulating collagenesis. The main ingredient of Olidia® is PLLA. PLLA has been used around the world for over 20 years in medical devices, e.g. for dissolving sutures. As Olidia® is made of synthetic materials, there is no need for allergy testing before the procedure.
What is PLLA?
It is poly-L-lactic acid (PLLA) is a biocompatible and biodegradable polymer. PLLA particles stimulate fibroblasts to produce collagen, while the newly formed collagen creates volume. After administration, PLLA is absorbed and degraded, thereby eventually undergoing respiration as Co2.
PLLA is the most durable dermal filler of all currently FDA approved biodegradable products. In 80% of respondents, it lasted for about 24 months.


Main Composition : PLLA(poly L-Lactic acid)
Packaging: 365mg/vial, 1vial/box
Indications: Narrow area(nasolabial folds, nose, chin, forehead, frown, tear through, malar), Wide area(cheek temple etc.)
Efficacy: Stimulate collagen generation
Expiry date: 3 years
Storage: Store at room temperature below 30ºC.  It is forbidden to be frozen.
How To Use:

1. Remove the cap of Olidia. (Make sure to check whether the product package is damaged or broken.)
2. Wipe its rubber stopper with an antiseptic. When the aluminum cap or rubber stopper of the vial is damaged do not use the product.
3. Connect an 18G sterile needle to a 10ml sterile single use syringe as shown. (5ml syringe also fine)
4. Slowly fill 5ml to 7ml saline water into the 10ml single use syringe.
5. Slowly add the sterile water into the vial. At this time pierce the rubber cap with the 18G needle at once.
6. Leave the reconstituted solution in the vial for maximum 2 hours to dilute.
7. Keep in mind not to shake the vial. The reconstituted solution must be immediately used. After reconstitution, any non used or remaining reconstituted solution must be discarded.
8. Just before treatment to patients, Shake the reconstituted solution for better suspension. Olidia solution will be look white and translucent.
9. Reconstituted solutions should be within 72hours. Any non used reconstituted solution must be discarded.
10. For the tips for general clinic, Just before Olidia treatment to the patient, we can add 1ml to 2ml of 

Product Description

Etrebelle PLA Korea Injectable hyaluronic acid PLLA collagen 
 

stimulated injection product 
Etrebelle is a hybrid product of PLA fine particles and HA.
It simultaneously improves wrinkles and volume by creates new tissues in lost skin tissue.

Main ingredients

PLA(Poly Lactic Acid) - 170mg
HA(Sodium Hyaluronate) - 30mg
Benefits of PLA microparticle
With promotion of collagen production, it maintains natural volume for more than 2 years.
No mobility to surrounding tissues outside the treated area.
No clogging on injection with spherical particles.
Smooth shooting with lubrication of HA.
Reduced procedure time due to faster suspension time.
It completely decomposed in the human body after a certain period of time with Biodegradable, bioabsorbable.

Q:Is it safe?
A:There are very few risks, because it naturally occurs in body. None of it remains in skin and the skin does not suffer any damage.

Q:Is there any side effects? A:The most common side effects are tenderness, swelling, firmness, lumps/bumps, bruising, pain,
redness, discoloration, and itching. Most side effects are mild or moderate and last 14 days or less.

Q:Does the treatment hurt?
A:The treatment is relatively painless.

Q: Can I put my own logo (OEM)?
A Yes!

Q: How can you guarantee the production quality?
A: We have strictly quality control system in our production process which is CE certified.